Sourcing Guides
Flame-Resistant Workwear: A Buyer's Guide
Learn how EN ISO 11612 codes and NFPA 2112 certification work, and use a practical checklist to choose flame-resistant workwear for your site.
BES-TEX Team · · Updated 2026-11-20
Flame-resistant (FR) workwear is bought for one reason: it should not keep burning after the ignition source is removed. That sounds simple, but FR clothing is not defined by colour or a generic “fireproof” label. For industrial buyers, the useful questions are which standard a garment was tested to, what its performance codes mean, and how the protection behaves after laundry and wear.
1. The standards you will meet most often
EN ISO 11612
EN ISO 11612 specifies protective clothing against heat and flame. It uses letter codes for different hazards, including A for limited flame spread, B for convective heat, C for radiant heat, D for molten aluminium splash, and E/F for molten iron splash. When comparing garments, look at the full code and the reported indices rather than the words “FR certified”.
NFPA 2112
NFPA 2112 is the US standard for flame-resistant garments used for industrial flash fire protection. Garments are tested for flash fire exposure and thermal shrinkage, and it is widely requested by oil, gas, chemical and utility buyers.
2. Fabric families in plain language
- Inherently FR fibres such as aramid and modacrylic blends: flame resistance is built into the fibre and does not wash away.
- Treated cotton or cotton blends: the finish is applied to the fabric, so follow the care label because laundering practices affect service life.
- Multi-layer systems: used where higher thermal protection is needed; comfort and mobility become part of the selection.
3. Match protection to the task
- Oil, gas and chemical plants: look for flash-fire protection such as NFPA 2112 where it is required by site rules.
- Foundries, welding and hot-work areas: check the relevant EN ISO 11612 codes for convective heat, radiant heat or molten metal splash.
- Electrical work: flame resistance alone is not enough. Where arc flash is a hazard, select garments with a declared arc rating instead.
4. Details to check before you order
- Ask for the exact test standard, performance code and current certificate for the garment you are buying.
- Check whether the FR property is inherent or finish-based, and confirm the recommended laundry process.
- Review closures, pockets and trims. Non-FR thread, zips or bulky accessories can weaken the overall protection.
- Confirm the size range and layering plan. FR clothing is often worn over other layers, and fit affects both safety and comfort.
- If you need custom branding, agree the embroidery, label and placement before sampling so the certified configuration is not changed.
5. Care and service life
FR protection is a system, not only a fabric. Washing chemistry, water hardness, drying temperature and abrasion all influence how long a garment performs as tested. Keep the care label, separate FR laundry from contaminated workwear, and replace garments that are damaged or heavily worn.
6. A short sourcing checklist
For a first inquiry, tell your supplier the hazard you are protecting against, the standard or market you need, your quantity and size breakdown, and whether you need branding. That is enough to move from “FR coverall” to a garment that fits the actual risk assessment.
Always verify the current standard edition and the certification documents for the exact item you plan to buy. Requirements can differ by market and by worksite.
About BES-TEX
Shanghai Bes-tex Apparel Co., Ltd (BES-TEX) is a workwear and PPE supplier based in Shanghai, China. We supply protective clothing for industrial, logistics and outdoor teams, and support customisation, sizing and documentation for export markets.
Need help choosing the right garment or requesting a quotation? Contact our team.
Email: info@bes-tex.cn / kevin@bes-tex.cn
Phone / WhatsApp: +86 159 2126 7046
Registered address: J, No. 912 Yecheng Road, Jiading Industrial Zone, Shanghai, China